Skip to content Skip to footer

Carbon Fiber Mustang Power Panel for 1987-93/Rocker Part No 50430

$184.99

Painless Part Number: 50430 Category: Tags: , , , , , , , , , , , , , , Product ID: 21044

Description

Panel Dimensions: 8.5″ L x 5″ H

Mounts in radio/stereo location of 1987 – 1993 Mustangs. Includes a (1) start switch, (2) Red On/Off, (2) Blue On/Off, (2) Amber On/Off, (1) Red On/Off/On, (1) Green On/Off/On. Also includes 18′ of wire.

Reviews

There are no reviews yet.

Be the first to review “Carbon Fiber Mustang Power Panel for 1987-93/Rocker Part No 50430”

You may also like…

Mustang Power Panel for ’87-’93 (Toggle) Part No 50421

$151.99

Painless Part Number: 50421 Category: Tags: , , , , , , , , , , , Product ID: 21042

Description

Panel Dimensions: 8.5″ L x 5″ H

Mounts in radio/stereo location of 1987 – 1993 Mustangs. Kit includes six colored LEDs, six heavy-duty on/off toggle switches, and one each of momentary and on/off/on switches color-coded TXL wire.

Reviews

There are no reviews yet.

Be the first to review “Mustang Power Panel for ’87-’93 (Toggle) Part No 50421”

You may also like…

Mustang Power Panel for ’79-’86 (Rocker) Part No 50210

$169.99

Engine: Any
Trans.: Any

Painless Part Number: 50210 Category: Tags: , , , , , , , , , , , Product ID: 21007

Description

Panel Dimensions: 7.90″ L x 2.85″ W

Mounts in radio/stereo location of 1979 – 1986 Mustangs. Kit includes six lighted on/off switches, one lighted on / off / momentary switch, one unlighted momentary switch, one lighted on / off / on switch, and color codes TXL wire.

Reviews

There are no reviews yet.

Be the first to review “Mustang Power Panel for ’79-’86 (Rocker) Part No 50210”

You may also like…

22 Circuit Direct Fit 1969-70 Mustang Chassis Harness Part No 20122

$849.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Accessory Relay
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Lights
  8. Electric Choke
  9. Emergency Flashers
  10. Fused Power Source
  11. Glove Box Light
  12. Headlights
  13. Horn (Relay)
  14. Ignition Coil
  15. Instrument Panel Lighting and Gauges*
  16. Park Lights
  17. Radio/Clock (Constant and Switched)
  18. Starting
  19. Tail Lights and License Plate Light
  20. Trunk Light
  21. Turn Signals
  22. Wipers and Washer Pump

* Including Wires For:
Aftermarket Tachometer
Ammeter
Brake Warning Light
Fuel Gauge
Gear Indicator Light
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Complete Ford color-coded chassis wiring harness for:

  • 1969 Ford Mustang
  • 1970 Ford Mustang
Painless Part Number: 20122 Category: Tags: , , , , , , , , Product ID: 20767

Description

This 22 circuit direct fit 1969-1970 Ford Mustang wiring harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford wiring color codes for easy installation.

Fits:

  • 1969 Ford Mustang
  • 1970 Ford Mustang

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Direct Fit 1969-70 Mustang Chassis Harness Part No 20122”

You may also like…

22 Circuit Direct Fit 1967-68 Mustang Chassis Harness – Part No 20121

$779.99

This direct-fit harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Accessory Relay
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Lights
  8. Electric Choke
  9. Emergency Flashers
  10. Fused Power Source
  11. Glove Box Light
  12. Headlights
  13. Horn (Relay)
  14. Ignition Coil
  15. Instrument Panel Lighting and Gauges*
  16. Park Lights
  17. Radio/Clock (Constant and Switched)
  18. Starting
  19. Tail Lights and License Plate Light
  20. Trunk Light
  21. Turn Signals
  22. Wipers and Washer Pump

* Including Wires For:
Aftermarket Tachometer
Ammeter
Brake Warning Light
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Complete Ford color-coded chassis wiring harness for:

  • 1967 Ford Mustang
  • 1968 Ford Mustang
Painless Part Number: 20121 Category: Tags: , , , , , , , Product ID: 20765

Description

This 22 circuit direct fit 1967-1968 Ford Mustang wiring harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford wiring color codes for easy installation.

Fits:

  • 1967 Ford Mustang
  • 1968 Ford Mustang

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Direct Fit 1967-68 Mustang Chassis Harness – Part No 20121”

You may also like…

22 Circuit Direct Fit 1965-66 Mustang Chassis Harness Part No 20120

$886.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Accessory Relay
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Lights
  8. Electric Choke
  9. Emergency Flashers
  10. Fan Relay Activation Power
  11. Fused Power Source
  12. Glove Box Light
  13. Headlights
  14. Horn (Relay)
  15. Ignition Coil
  16. Instrument Panel Lighting and Gauges*
  17. Park Lights
  18. Radio/Clock (Constant and Switched)
  19. Starting
  20. Tail Lights and License Plate Light
  21. Turn Signals
  22. Wipers and Washer Pump

* Including Wires For:
Ammeter
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Connections Included:

Blower motor, wipers, ignition, headlight switches, voltage regulator, turn signals and flashers, lighter, brake switch, dimmer switch, brake warning light and headlight bulbs

Complete Ford color-coded chassis wiring harness for:

  • 1965 Ford Mustang
  • 1966 Ford Mustang
Painless Part Number: 20120 Category: Tags: , , , , , , Product ID: 20763

Description

This 22 circuit direct fit 1965-1966 Ford Mustang wiring harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford wiring color codes for easy installation.

Fits:

  • 1965 Ford Mustang
  • 1966 Ford Mustang

NOTE: THIS HARNESS WILL NOT FIT 1964 1/2 MUSTANGS

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Direct Fit 1965-66 Mustang Chassis Harness Part No 20120”

You may also like…

Ford 3G Alternator Harness Part No 30831

$78.99

This kit contains all of the components needed in order to connect a Ford 3G Alternator. This kit will contain the following:

  • (1) 7’ Red 6 gauge charge wire
  • (1) 8’ Black/Red ground wire
  • (2) Pre-installed connectors (a 3 pin connector and 1 pin connector)
  • (1) Bag kit containing (150 amp in-line fuse, 1 fuse holder, 2 screws, 6 large un-insulated ring terminals, 4 smaller insulated ring terminals, 4 splices, 4 pieces of heat shrink & 15 zip ties)

Year: Universal
Make: Universal
Model: Universal
Engine: Any
Trans.: Any

Painless Part Number: 30831 Category: Tags: , , , , Product ID: 20926

Description

This kit contains all of the components needed in order to connect a Ford 3G Alternator. This kit will contain the following:

  • (1) 7’ Red 6 gauge charge wire
  • (1) 8’ Black/Red ground wire
  • (2) Pre-installed connectors (a 3 pin connector and 1 pin connector)
  • (1) Bag kit containing (150 amp in-line fuse, 1 fuse holder, 2 screws, 6 large un-insulated ring terminals, 4 smaller insulated ring terminals, 4 splices, 4 pieces of heat shrink & 15 zip ties)

The popular Ford 3G Alternator conversion just got easier. The Painless 3G kit takes the parts chase away from this ever growing charging system upgrade. Until now, pigtails, large gauge charge wire, and a heavy duty inline fuse have all had to be sourced individually. This kit comes with both alternator connectors pre-installed, 8’ of large 6 gauge charge wire, a weather-proof fuse holder with a heavy duty 150 amp inline fuse, detailed instructions, and all weatherproof splices & ring terminals needed for a proper install.

Reviews

There are no reviews yet.

Be the first to review “Ford 3G Alternator Harness Part No 30831”

You may also like…

DuraSpark II Ignition Harness Part No 30812

$85.99

Year: Universal
Make: Universal
Model: Universal
Engine: Carbureted
Trans.: Any

Painless Part Number: 30812 Category: Tags: , , , Product ID: 20902

Description

Perfect replacement for your Ford Duraspark II ignition system or to upgrade your old points style ignition. It allows for the factory location of your module and coil. This part is recommended if you are also replacing the chassis harness.

Fits factory Ford Duraspark II Ignition systems with the blue module.

Reviews

There are no reviews yet.

Be the first to review “DuraSpark II Ignition Harness Part No 30812”

You may also like…

Universal Convertible Top Wiring Harness Part No 30730

$30.99

The Painless convertible top gives you all new high-grade TXL wiring to wire into your existing factory hydraulic convertible top motor.  Included is new 12 gauge TXL wire to run from the battery to the new included circuit breaker, circuit breaker to the factory switch, and from the factory switch to the convertible top motor.

Description

The Painless convertible top gives you all new high-grade TXL wiring to wire into your existing factory hydraulic convertible top motor.  Included is new 12 gauge TXL wire to run from the battery to the new included circuit breaker, circuit breaker to the factory switch, and from the factory switch to the convertible top motor.

Reviews

There are no reviews yet.

Be the first to review “Universal Convertible Top Wiring Harness Part No 30730”

21 Circuit Customizable 1966-1976 Ford Chassis Harness Part No 10123

$569.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory (Relay)
  3. Backup Lights
  4. Brake Lights
  5. Charging
  6. Dome and Courtesy Lights
  7. Electric Choke
  8. Emergency Flashers
  9. Fan Relay Activation Power
  10. Fused Power Source
  11. Headlights
  12. Horn (Relay)
  13. Ignition Coil
  14. Instrument Panel Lighting and Gauges*
  15. Park Lights
  16. Radio/Clock (Constant and Switched)
  17. Starting
  18. Tail Lights and License Plate Light
  19. Third Brake Light
  20. Turn Signals
  21. Wipers

* Including Wires For:
Brake Warning Light
Fuel Gauge
Gear Indicator Light
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Year: 1966-1976
Make: Ford, Lincoln, Mercury
Model: Universal
Engine: Carbureted or Any Stand Alone Fuel Injection
Trans.: Any

Number of Circuits: 21 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Universal
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Multiple Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Painless Part Number: 10123 Category: Tags: , , , , Product ID: 20700

Description

This 21 circuit Painless Wiring kit can be used in almost any application where you want Ford color coded wires. This wiring harness uses our unique covered micro-fuse block that is compact for easy mounting.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation.

Due to the complexity of sequential turn signals, this harness will not work for Thunderbird or Cougar vehicles utilizing OEM sequencer modules.

Reviews

There are no reviews yet.

Be the first to review “21 Circuit Customizable 1966-1976 Ford Chassis Harness Part No 10123”

You may also like…

Make It Easy.
Make It Painless.

Address

2501 Ludelle St
Fort Worth, Texas 76105
817-244-6212

Tech Support

Central Time Zone (CST)

Monday-Thursday 8AM to 5PM

Friday 8AM to 4:30PM 

1-800-423-9696

Newsletter

Red Goat Marketing © 2024. All Rights Reserved.