Skip to content Skip to footer

26 Circuit Direct Fit 1969 Camaro Harness Part No 20202

$1,116.99

Your most complete ’69 Chevy Camaro Harness! Featuring 26 circuits with virtually every connector installed on the harness out of the box. This harness covers all common options and even features a fully integrated ground circuit.  Included are provisions for the RS headlights and taillights, cowl hood, and even a complete console harness!  Also included is our 120+ page manual full of color schematics, photos, and step-by-step instructions that make wiring your 1969 Camaro a breeze!

Painless Part Number: 20202 Category: Tags: , , , , , Product ID: 20775

Description

Your most complete ’69 Chevy Camaro Harness! Featuring 26 circuits with virtually every connector installed on the harness out of the box. This harness covers all common options and even features a fully integrated ground circuit.  Included are provisions for the RS headlights and taillights, cowl hood, and even a complete console harness!  Also included is our 120+ page manual full of color schematics, photos, and step-by-step instructions that make wiring your 1969 Camaro a breeze!

  • Numerous components have the connectors and terminals pre-installed to make connections plug-n-play
  • All exterior lights have the correct sockets and bulbs pre-installed
  • 6 gauge charge wire and 150 amp MIDI fuse
  • Fully integrated ground circuit
  • 120+ page manual full of color schematics, photos, and step-by-step instructions

The heart of your new Camaro wiring harness is centered around this factory style precision molded fuse block.  Updated ATC style fuses ensure that the 26 circuits stay protected and safe.

The backside of the fuse block utilizes a factory style bulkhead connector to ensure there is no trimming or cutting to your firewall.  This allows you to easily install the fuse block in the factory location.

Plug and play design makes install easy, no matter your options.  Also included are pre-terminated connectors for either standard or RS taillight options.  Don’t have RS taillights now but may add them down the road?  Simply unplug the new connector and plug in the new one!

The new status indicator circuit boards replace the brittle factory indicator light molded plastic and provide color correct incandescent bulbs to retain the factory look. Ever need to replace a bulb down the road?  The board are easily unplugged and removed and bulb changes are a breeze!

Each pre-terminated connector is tagged for easy routing and installation.

There is no need to make extra trips to the parts store with this kit.  Connectors, terminals, extra fuses, light bulbs, etc., all come in the box.  Any questions while installing?  Just refer to the complete 120+ page installation manual, or give our tech line a call!

Reviews

There are no reviews yet.

Be the first to review “26 Circuit Direct Fit 1969 Camaro Harness Part No 20202”

You may also like…

26 Circuit Direct Fit 1970-72 Chevelle / Malibu Harness Part No 20130

$1,088.99

This direct fit wiring harness gives you everything you need, plus more to wire your 1970, 1971, or 1972 Chevelle! Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Various pigtails & light sockets are provided, so the harness easily fits mismatched cars (1971-1972 cars with 1970 front ends, or 1970 cars with 1971-1972 rear bumpers). The gauge cluster pigtail provided allows for the square “full sweep dash” harness and includes a “Super Sport” cluster pigtail. This makes it easy for those with a “full sweep” dash to swap to a “SS” style cluster at a later date by only undoing one connector and plugging in the separate pigtail on the harness. This harness follows all of the same wire routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 140+ page manual full of color schematics, photos, and step-by-step instructions!

Painless Part Number: 20130 Category: Tags: , , , , , , , Product ID: 20773

Description

This direct fit wiring harness gives you everything you need, plus more to wire your 1970, 1971, or 1972 Chevelle! Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Various pigtails & light sockets are provided, so the harness easily fits mismatched cars (1971-1972 cars with 1970 front ends, or 1970 cars with 1971-1972 rear bumpers). The gauge cluster pigtail provided allows for the square “full sweep dash” harness and includes a “Super Sport” cluster pigtail. This makes it easy for those with a “full sweep” dash to swap to a “SS” style cluster at a later date by only undoing one connector and plugging in the separate pigtail on the harness. This harness follows all of the same wire routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 140+ page manual full of color schematics, photos, and step-by-step instructions!

  • Numerous components have the connectors and terminals pre-installed to make connections plug-n-play
  • All exterior lights have the correct sockets and bulbs pre-installed
  • 6 gauge charge wire and 100 amp MIDI fuse
  • Fully integrated ground circuit
  • 140+ page manual full of color schematics, photos, and step-by-step instructions

Note: Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring. These harnesses do include the switch power wire for the factory power window/locks and A/C. These harnesses do include a new blower motor harness for those with heat only systems.

The heart of your new Chevelle wiring harness is centered around this factory style precision molded fuse block.  Updated ATC style fuses ensure that the 26 circuits stay protected and safe.

The backside of the fuse block utilizes a factory style bulkhead connector to ensure there is no trimming or cutting to your firewall.  This allows you to easily install the fuse block in the factory location.

Plug and play design makes install easy, no matter your options.  Don’t have a center console but may add one later?  The included console harness can be easily added at any time.

Each pre-terminated connector is tagged for easy routing and installation.

There is no need to make extra trips to the parts store with this kit.  Connectors, terminals, extra fuses, light bulbs, etc., all come in the box.  Any questions while installing?  Just refer to the complete 120+ page installation manual, or give our tech line a call!

Reviews

There are no reviews yet.

Be the first to review “26 Circuit Direct Fit 1970-72 Chevelle / Malibu Harness Part No 20130”

You may also like…

26 Circuit Direct Fit 1969 Chevelle / Malibu Harness Part No 20129

$1,028.99

This direct fit wiring harness gives you everything you need, plus more to wire your 1969 Chevelle!  Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Including options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. This harness follows all of the same wire routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 120+ page manual full of color schematics, photos, and step-by-step instructions!

Painless Part Number: 20129 Category: Tags: , , , , Product ID: 20771

Description

This direct fit wiring harness gives you everything you need, plus more to wire your 1969 Chevelle!  Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Including options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. This harness follows all of the same wire routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 120+ page manual full of color schematics, photos, and step-by-step instructions!

  • Numerous components have the connectors and terminals pre-installed to make connections plug-n-play
  • All exterior lights have the correct sockets and bulbs pre-installed
  • 6 gauge charge wire and 150 amp MIDI fuse
  • Fully integrated ground circuit
  • 120+ page manual full of color schematics, photos, and step-by-step instructions

Note: Options not supported in these harnesses are:  wiring for the TCS relay for turbo 400 transmissions, wiring for the factory power window/locks, and factory A/C wiring. These harnesses do include the switch power wire for the factory power window/locks and A/C. These harnesses do include a new blower motor harness for those with heat only systems.

The heart of your new Chevelle wiring harness is centered around this factory style precision molded fuse block.  Updated ATC style fuses ensure that the 26 circuits stay protected and safe.

The backside of the fuse block utilizes a factory style bulkhead connector to ensure there is no trimming or cutting to your firewall.  This allows you to easily install the fuse block in the factory location.

Plug and play design makes install easy, no matter your options.  Don’t have a center console but may add one later?  The included console harness can be easily added at any time.

Each pre-terminated connector is tagged for easy routing and installation.

There is no need to make extra trips to the parts store with this kit.  Connectors, terminals, extra fuses, light bulbs, etc., all come in the box.  Any questions while installing?  Just refer to the complete 120+ page installation manual, or give our tech line a call!

Reviews

There are no reviews yet.

Be the first to review “26 Circuit Direct Fit 1969 Chevelle / Malibu Harness Part No 20129”

You may also like…

26 Circuit Direct Fit 1968 Chevelle / Malibu Harness Part No 20128

$1,009.99

This direct fit wiring harness gives you everything you need, plus more to wire your 1968 Chevelle! Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Including options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. This harness follows all of the same wire routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 120+ page manual full of color schematics, photos, and step-by-step instructions!

Painless Part Number: 20128 Category: Tags: , , , , , Product ID: 20769

Description

This direct fit wiring harness gives you everything you need, plus more to wire your 1968 Chevelle! Not only are there provisions for connecting standard factory components, we also provide what you will need for aftermarket components. Including options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. This harness follows all of the same wire routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also available is a 120+ page manual full of color schematics, photos, and step-by-step instructions!

  • Numerous components have the connectors and terminals pre-installed to make connections plug-n-play
  • All exterior lights have the correct sockets and bulbs pre-installed
  • 6 gauge charge wire and 150 amp MIDI fuse
  • Fully integrated ground circuit
  • 120+ page manual full of color schematics, photos, and step-by-step instructions

Note: Options not supported in these harnesses are: wiring for the TCS relay for turbo 400 transmissions, wiring for the factory power window/locks, and factory A/C wiring. These harnesses do include the switch power wire for the factory power window/locks and A/C. These harnesses do include a new blower motor harness for those with heat only systems.

The heart of your new Chevelle wiring harness is centered around a factory style precision molded fuse block.  Updated ATC style fuses ensure that the 26 circuits stay protected and safe.

The backside of the fuse block utilizes a factory style bulkhead connector to ensure there is no trimming or cutting to your firewall.  This allows you to easily install the fuse block in the factory location.

Plug and play design makes install easy, no matter your options.  Don’t have a center console but may add one later?  The included console harness can be easily added at any time.

Each pre-terminated connector is tagged for easy routing and installation.

There is no need to make extra trips to the parts store with this kit.  Connectors, terminals, extra fuses, light bulbs, etc., all come in the box.  Any questions while installing?  Just refer to the complete 120+ page installation manual, or give our tech line a call!

Reviews

There are no reviews yet.

Be the first to review “26 Circuit Direct Fit 1968 Chevelle / Malibu Harness Part No 20128”

You may also like…

22 Circuit Direct Fit 1969-70 Mustang Chassis Harness Part No 20122

$849.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Accessory Relay
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Lights
  8. Electric Choke
  9. Emergency Flashers
  10. Fused Power Source
  11. Glove Box Light
  12. Headlights
  13. Horn (Relay)
  14. Ignition Coil
  15. Instrument Panel Lighting and Gauges*
  16. Park Lights
  17. Radio/Clock (Constant and Switched)
  18. Starting
  19. Tail Lights and License Plate Light
  20. Trunk Light
  21. Turn Signals
  22. Wipers and Washer Pump

* Including Wires For:
Aftermarket Tachometer
Ammeter
Brake Warning Light
Fuel Gauge
Gear Indicator Light
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Complete Ford color-coded chassis wiring harness for:

  • 1969 Ford Mustang
  • 1970 Ford Mustang
Painless Part Number: 20122 Category: Tags: , , , , , , , , Product ID: 20767

Description

This 22 circuit direct fit 1969-1970 Ford Mustang wiring harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford wiring color codes for easy installation.

Fits:

  • 1969 Ford Mustang
  • 1970 Ford Mustang

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Direct Fit 1969-70 Mustang Chassis Harness Part No 20122”

You may also like…

22 Circuit Direct Fit 1967-68 Mustang Chassis Harness – Part No 20121

$779.99

This direct-fit harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Accessory Relay
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Lights
  8. Electric Choke
  9. Emergency Flashers
  10. Fused Power Source
  11. Glove Box Light
  12. Headlights
  13. Horn (Relay)
  14. Ignition Coil
  15. Instrument Panel Lighting and Gauges*
  16. Park Lights
  17. Radio/Clock (Constant and Switched)
  18. Starting
  19. Tail Lights and License Plate Light
  20. Trunk Light
  21. Turn Signals
  22. Wipers and Washer Pump

* Including Wires For:
Aftermarket Tachometer
Ammeter
Brake Warning Light
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Complete Ford color-coded chassis wiring harness for:

  • 1967 Ford Mustang
  • 1968 Ford Mustang
Painless Part Number: 20121 Category: Tags: , , , , , , , Product ID: 20765

Description

This 22 circuit direct fit 1967-1968 Ford Mustang wiring harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford wiring color codes for easy installation.

Fits:

  • 1967 Ford Mustang
  • 1968 Ford Mustang

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Direct Fit 1967-68 Mustang Chassis Harness – Part No 20121”

You may also like…

22 Circuit Direct Fit 1965-66 Mustang Chassis Harness Part No 20120

$886.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Accessory Relay
  4. Backup Lights
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Lights
  8. Electric Choke
  9. Emergency Flashers
  10. Fan Relay Activation Power
  11. Fused Power Source
  12. Glove Box Light
  13. Headlights
  14. Horn (Relay)
  15. Ignition Coil
  16. Instrument Panel Lighting and Gauges*
  17. Park Lights
  18. Radio/Clock (Constant and Switched)
  19. Starting
  20. Tail Lights and License Plate Light
  21. Turn Signals
  22. Wipers and Washer Pump

* Including Wires For:
Ammeter
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay, Accessory Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory Ford
Circuit Designations: Printed on Wires

Connections Included:

Blower motor, wipers, ignition, headlight switches, voltage regulator, turn signals and flashers, lighter, brake switch, dimmer switch, brake warning light and headlight bulbs

Complete Ford color-coded chassis wiring harness for:

  • 1965 Ford Mustang
  • 1966 Ford Mustang
Painless Part Number: 20120 Category: Tags: , , , , , , Product ID: 20763

Description

This 22 circuit direct fit 1965-1966 Ford Mustang wiring harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford wiring color codes for easy installation.

Fits:

  • 1965 Ford Mustang
  • 1966 Ford Mustang

NOTE: THIS HARNESS WILL NOT FIT 1964 1/2 MUSTANGS

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Direct Fit 1965-66 Mustang Chassis Harness Part No 20120”

You may also like…

26 Circuit Direct Fit 1978-81 Camaro Harness Part No 20114

$898.99

This direct-fit harness includes circuits for:

  1. Accessory
  2. Accessory / Cigarette Lighter
  3. Backup Lights
  4. Blower Motor
  5. Brake Lights
  6. Charging
  7. Courtesy and Dome Light
  8. Electric Choke
  9. Electric Fuel Pump
  10. Emergency Flashers
  11. Fused Power Source
  12. Glove Box Light
  13. Headlights
  14. Horn (Relay)
  15. Ignition Coil
  16. Instrument Panel Lighting and Gauges*
  17. Park Lights
  18. Power Door Locks
  19. Power Windows
  20. Radio/Clock (Constant and Switched)
  21. Seat Belt Lights
  22. Starting
  23. Tail Lights and License Plate Light
  24. Turn Signals
  25. Under Hood Light
  26. Wipers and Washer Pump

* Including Wires For:
Aftermarket Gauge Power
Brake Warning Light
Fuel Gauge
Gear Indicator Light
Key Buzzer
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Number of Circuits: 26
Fuse Type: ATC
Firewall Passthrough: bulkhead
Color Code Based:  GM

 

 

Complete Automotive Wiring Harness for:

  • 1978 Chevrolet Camaro
  • 1979 Chevrolet Camaro
  • 1980 Chevrolet Camaro
  • 1981 Chevrolet Camaro
Painless Part Number: 20114 Category: Tags: , , , , , , , , , Product ID: 20761

Description

This 26 circuit direct fit 1978-1981 2nd Gen Camaro harnesses has virtually every connector installed on the harness out of the box. These harnesses are split into three sections (engine, interior, & rear) and features a fully integrated ground circuit. You’ll find many upgrades in ths harnesses such as a 6 gauge charge wire and a 150 amp midi fuse. Also available is a 150+ page full color step by step manual that also covers many alternative wiring options and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.

NOTE: Factory A/C wiring is not included, as this option seemed to almost change year to year. These harnesses DO include the power wire for the A/C switch to make it as easy as plugging in your original A/C harness, an aftermarket reproduction harness, or an aftermarket A/C system. These harnesses DO include a new blower motor harness for those with heat only systems.

Wiring for factory power window/locks is also not included but available as a separate part number. Painless part # 30715 is a factory style power window/power lock harness for these vehicles if a replacement harness for this option is needed. Like the A/C wires, these chassis harnesses DO include the power wires for the power window/lock option making it another easy plug in to a factory power window/lock harness or the Painless Power Window/Lock Harness.

Fits:

  • 1978 Chevrolet Camaro
  • 1979 Chevrolet Camaro
  • 1980 Chevrolet Camaro
  • 1981 Chevrolet Camaro

Reviews

There are no reviews yet.

Be the first to review “26 Circuit Direct Fit 1978-81 Camaro Harness Part No 20114”

You may also like…

21 Circuit Direct Fit 1966-67 Chevy II/Nova Chassis Harness Part No 20110

$587.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Backup Lights
  4. Brake Lights
  5. Charging
  6. Dome Light
  7. Electric Choke
  8. Emergency Flashers
  9. Fan Relay Activation Power
  10. Fused Power Source
  11. Glove Box Light
  12. Headlights
  13. Horn (Relay)
  14. Ignition Coil
  15. Instrument Panel Lighting and Gauges*
  16. Park Lights
  17. Radio/Clock (Constant and Switched)
  18. Starting
  19. Tail Lights And License Plate Light
  20. Turn Signals
  21. Wipers

* Including Wires For:
Brake Warning Light
Charge Light
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge

Number of Circuits: 21 Circuits – 12 Fuses w/ Horn Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Blade & Maxi Fuse
Firewall Passthrough: Grommet
Color Code Based:  Factory GM
Circuit Designations: Printed on Wires

Connections Included:

Headlight switch, Headlight connectors, Fuel gauge connector, Dimmer switch, Brake switch, Heater switch, Blower resistor, Wiper switch, Backup switch, Horn, Dash light sockets, Warning light sockets

Complete automotive chassis wiring harness fits:

  • 1966 Chevrolet II or Nova
  • 1967 Chevrolet II or Nova
Painless Part Number: 20110 Category: Tags: , , , , , , , Product ID: 20755

Description

This 21 circuit direct fit wiring harness has many of the factory connectors already installed on the harness out of the box for your 1966 or 1967 Chevy II or Nova. Including: the headlight connectors & switch, fuel gauge connnector, dimmer switch, brake switch, heater switch, blower resistor, wiper switch, backup switch, horn, dash light sockets, and warning light sockets. This harness is split into three sections (engine, dome light, & rear) for easy installation and troubleshooting. You’ll also find in this kit a harness for the factory air, a high output alternator pigtail with the connector installed, two door jam switches, 12 instrument panel light bulbs, eight harness mounting clamps, a custom Painless mounting plate for the fuse block, and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.

Wire your Nova once and wire it right with Painless Wiring!

Reviews

There are no reviews yet.

Be the first to review “21 Circuit Direct Fit 1966-67 Chevy II/Nova Chassis Harness Part No 20110”

You may also like…

21 Circuit Direct Fit 1976-1986 Jeep CJ Harness Part No 10150

$871.99

  • Factory V6 & V8 Tachometers-  Inline connections are now provided at the ignition switch, just like a factory harness, that plug into the wire leads found on factory V6 & V8 tachometers.
  • Factory Clock- Two connectors that provide power and ground to the clock and clock backlighting that plug directly into a factory clock. These connectors can be removed to allow connection to a universal CJ clock as well.
  • Automatic Transmission Steering Column- Reverse switch and neutral safety switch connections for those using automatic transmission columns.
  • Under Hood Light- A factory style connection is now supplied in the engine harness. This connection will simply plug directly into the factory under hood light.
  • Manual Transmission Pigtail- The old 10110 has always had a connection for manual transmissions, however, the 10150 now also comes with a transmission pigtail. This pigtail allows for the total replacement of the neutral safety switch, reverse switch, and four wheel drive indicator switch wires, where as the previous 10110 simply plugged into the existing factory transmission pigtail. Some assembly will be required to this pigtail based on the transmission your CJ currently has, instructions and details are provided.
  • Factory Tail Light Connectors-  Factory style molded connectors for the tail lights are now pre-installed onto the tail harness, allowing for a true plug and play connection to those using factory tail lights. For those using aftermarket lights which do not have the factory molded connector, a pair of Weather –Pac connectors is also provided to produce a clean, weatherproof connection.
  • Molded Trailer Connector- Now included pre-spliced in the Tail Section of the harness is a connector for connecting to trailer lighting. This connector will supply tail light power, left and right turn/brake power, as well as a clean ground source. A mate to the pre-installed connector is even provided.
  • Factory Style parts Kit- This kit will provide factory style connectors and terminals for many visible connections. This makes for a cleaner appearing install. Also included are harness attachment clips that fit the ¼” holes left behind by the factory harness attachment clips.
  • Bulbs- The 10150 now includes all the bulbs needed for front turn/park and marker lights, rear turn/brake/tail and marker lights, as well as gauge cluster bulbs. Dielectric grease is also provided to prevent corrosion to the bulbs and headlight connections.
Painless Part Number: 10150 Category: Tags: , , , , , , , , , , , , , Product ID: 20709

Description

Not just a quick wash and a coat of wax on the old 10110, the new 10150 Direct Fit 1976-1986 Jeep CJ harness has undergone a complete “frame off” restoration. The new and improved harness addresses many issues that occasionally came up when trying to install the previous version.

Now included is a fully integrated ground circuit that connects directly to the negative side of the battery and provides a clean ground source to every component, as well as offering individual wires to help ground the dash and core support. This is a key addition for those using fiberglass bodies.

The charging system wiring has also been improved, now using 6 gauge charge wire and an inline 100 amp fuse, allowing hassle free usage of high amperage alternators. No more sourcing larger charge wire, piggybacking additional wire, or sourcing a larger inline fuse or fuse holder. The new 10150 comes out of the box capable of supporting a 100 amp alternator.

Connections for more factory CJ options have also been added. These additions include:

  • Factory V6 & V8 Tachometers-  Inline connections are now provided at the ignition switch, just like a factory harness, that plug into the wire leads found on factory V6 & V8 tachometers.
  • Factory Clock- Two connectors that provide power and ground to the clock and clock backlighting that plug directly into a factory clock. These connectors can be removed to allow connection to a universal CJ clock as well.
  • Automatic Transmission Steering Column- Reverse switch and neutral safety switch connections for those using automatic transmission columns.
  • Under Hood Light- A factory style connection is now supplied in the engine harness. This connection will simply plug directly into the factory under hood light.
  • Manual Transmission Pigtail- The old 10110 has always had a connection for manual transmissions, however, the 10150 now also comes with a transmission pigtail. This pigtail allows for the total replacement of the neutral safety switch, reverse switch, and four wheel drive indicator switch wires, where as the previous 10110 simply plugged into the existing factory transmission pigtail. Some assembly will be required to this pigtail based on the transmission your CJ currently has, instructions and details are provided.
  • Factory Tail Light Connectors-  Factory style molded connectors for the tail lights are now pre-installed onto the tail harness, allowing for a true plug and play connection to those using factory tail lights. For those using aftermarket lights which do not have the factory molded connector, a pair of Weather –Pac connectors is also provided to produce a clean, weatherproof connection.
  • Molded Trailer Connector- Now included pre-spliced in the Tail Section of the harness is a connector for connecting to trailer lighting. This connector will supply tail light power, left and right turn/brake power, as well as a clean ground source. A mate to the pre-installed connector is even provided.
  • Factory Style parts Kit- This kit will provide factory style connectors and terminals for many visible connections. This makes for a cleaner appearing install. Also included are harness attachment clips that fit the ¼” holes left behind by the factory harness attachment clips.
  • Bulbs- The 10150 now includes all the bulbs needed for front turn/park and marker lights, rear turn/brake/tail and marker lights, as well as gauge cluster bulbs. Dielectric grease is also provided to prevent corrosion to the bulbs and headlight connections.

The biggest improvement to this harness is the all new full color instruction manual. This manual provides 140+ pages of color schematics, photos, and step by step instructions to wiring your CJ from headlight to tail light and covers most popular aftermarket add-ons as well.

 

Reviews

There are no reviews yet.

Be the first to review “21 Circuit Direct Fit 1976-1986 Jeep CJ Harness Part No 10150”

You may also like…

Make It Easy.
Make It Painless.

Address

2501 Ludelle St
Fort Worth, Texas 76105
817-244-6212

Tech Support

Central Time Zone (CST)

Monday-Thursday 8AM to 5PM

Friday 8AM to 4:30PM 

1-800-423-9696

Newsletter

Red Goat Marketing © 2024. All Rights Reserved.