Skip to content Skip to footer

Bronco PowerBraid Kit Part No 70922

$124.99

Painless Part Number: 70922 Category: Tags: , , , , , Product ID: 21407

Description

Finish the job right with this complete PowerBraid kit for use with the Bronco 10113 harness. Contains all the appropriate diameter wire wrap, ties, and tape.

PowerBraid is a flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables.  The woven construction provides good drainage while maintaining superior abrasion resistance. The split loom design has a minimum overlap of 25% to allow for easy installation and optimum wiring protection.

  • Continuous Temperature Rating -94° to 257 °F
  • Melting Point 482°F

 

This kit includes:

  • 6 ft. – ¾” PowerBraid
  • 23 ft. – ½” PowerBraid
  • 40 ft. – ¼ PowerBraid
  • 38 ft. – 1/8” PowerBraid
  • 2 ft. – 3/8” Heat Shrink
  • 2.5 ft. – ¼ Heat Shrink
  • 1 ft. – ½ Heat Shrink
  • 100 – 4in. Tie Wraps
  • 40 – 7in Tie Wraps
  • 1 roll – Electrical Tape
  • 1 roll – Stretch and Seal Tape

Before: Not only is unprotected wiring an eyesore, it also runs the risk of coming into contact with sharp edges and chemicals that can create headaches.

The split loom design is easy to install and provides a minimum 25% overlap to allow optimum wiring protection.

After: PowerBraid will transform your engine bay, giving you a clean look and great protection!

Reviews

There are no reviews yet.

Be the first to review “Bronco PowerBraid Kit Part No 70922”

28 Circuit Direct Fit 1966-77 Bronco Harness W/O Switches Part No 10114

$887.99

Complete Ford Color-Code Direct Fit Wiring Harness for:

  • 1966 Ford Bronco
  • 1967 Ford Bronco
  • 1968 Ford Bronco
  • 1969 Ford Bronco
  • 1970 Ford Bronco
  • 1971 Ford Bronco
  • 1972 Ford Bronco
  • 1973 Ford Bronco
  • 1974 Ford Bronco
  • 1975 Ford Bronco
  • 1976 Ford Bronco
  • 1977 Ford Bronco

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory #1 B+
  3. Accessory #2 B+
  4. Accessory #3 B+
  5. Accessory #4 B+
  6. Accessory #5 Switched B+
  7. Accessory #6 Switched B+
  8. Accessory #7 Switched B+
  9. Accessory #8 Switched B+
  10. Accessory #9 B+ In ACC. Position
  11. Backup Lights
  12. Brake Lights
  13. Charging
  14. Cigarette Lighter
  15. Dome and Courtesy Lights
  16. Electric Choke
  17. Emergency Flashers
  18. Fused Power Source
  19. Headlights
  20. Horn (Relay)
  21. Ignition Coil
  22. Instrument Panel Lighting and Gauges*
  23. Park Lights
  24. Radio/Clock (Constant and Switched)
  25. Starting
  26. Tail Lights and License Plate Light
  27. Turn Signals
  28. Wipers and Washer Pump

 

* Including Wires For:
Aftermarket Tachometer
Ammeter
Brake Warning Light
Fuel Gauge
Fuel Tank Switch
Gear Indicator Light
Oil Gauge
Temperature Gauge
Voltmeter

Year: 1966-1977
Make: Ford
Model: Bronco
Engine: Carbureted or Any Stand Alone Fuel Injection
Trans.: Any

Number of Circuits: 23 Fuses w/ Horn Relay
Harness Length: Factory Fitment
Fuse Type: Mini Blade & Maxi Fuse
Firewall Passthrough: Multiple Grommet
Color Code Based:  1966 – 1977 Bronco
Circuit Designations: Printed Wire Tags on all Connectors and Printed on Wire for Open Ended Wires

Connections Included:

Hazard Flasher, Turn Flasher, Horn Relay, Heater Switch, Turn Switch, Wiper Motor, Dash Indicators, Lights and Instruments, Wiper Washer, Headlights, Park Lights, Turn Signals, Horn, Dimmer Switch, Voltage Regulator, Tail Lights and a parts kit that includes the neccessary factory Ford terminals to reuse factory connectors for the Headlight Switch, Ignition Switch, Wiper Switch, Dash Mounted Hazard Switch, Dash Label Lights, 1973-UP Turn Signal Switch, 1966-1967 Turn Switch, Brake Warning Light

Painless Part Number: 10114 Category: Tags: , , , , Product ID: 20692

Description

Designed with input from Ford Bronco owners everywhere, this Painless Performance 28 circuit direct fit 1966-1977 Bronco wiring harness sets a new standard in chassis wiring. This harness includes a molded plastic glove box that not only replaces the factory cardboard one that also mounts our weatherproof fuse block. You’ll also find factory-style molded exterior light connectors, Ford turn signal connectors and a Ford dimmer switch connector. This harness has most of the factory connections are already pre-terminated. Also available is an 80+ page full color step by step install manual with over 80 photos, drawings and harness schematics. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation.

Reviews

There are no reviews yet.

Be the first to review “28 Circuit Direct Fit 1966-77 Bronco Harness W/O Switches Part No 10114”

You may also like…

28-Circuit 1966-77 Bronco Chassis Harnesses Part No 10113

$945.99

Out of stock

* Air conditioning/heat
* Accessory #1 B+
* Accessory #2 B+
* Accessory #3 B+
* Accessory #4 B+
* Accessory #5 Switched B+
* Accessory #6 Switched B+
* Accessory #7 Switched B+
* Accessory #8 Switched B+
* Accessory #9 B+ in ACC position
* Backup lights
* Brake lights
* Charging
* Cigarette lighter
* Dome and courtesy lights
* Electric choke
* Emergency flashers
* Fused power source
* Headlights
* Horn (relay)
* Ignition coil
* Instrument panel lighting and gauges (see notes above)
* Parking lights
* Radio (constant/ignition hot)
* Starting
* Taillights and license plate light
* Turn signals
* Wipers and washer pump

Includes wires for an aftermarket tachometer, ammeter, brake warning light, fuel gauge, fuel tank switch, gear indicator light, oil gauge, temperature gauge, and voltmeter. The number of circuits does not reflect the number of fuses; some circuits share the same fuse.

Painless Part Number: 10113 Category: Tags: , , , , , , , , Product ID: 20690

Description

Painless Performance 28-Circuit 1966-77 Bronco chassis harnesses were designed with input from Bronco owners everywhere, this 28 circuit direct fit 1966-1977 Bronco harness sets a new standard in wiring. These harnesses include molded plastic glove boxes that not only replace the factory cardboard one, it also mounts a weatherproof fuse block. You’ll also find factory-style molded exterior light connectors, Ford turn signal connectors and a Ford dimmer switch connector. Most of the factory connections are already pre-terminated and include an 80 page full color step by step install manual with over 80 photos, drawings and harness schematics. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation.

 

Reviews

There are no reviews yet.

Be the first to review “28-Circuit 1966-77 Bronco Chassis Harnesses Part No 10113”

Ford 3G Alternator Harness Part No 30831

$78.99

This kit contains all of the components needed in order to connect a Ford 3G Alternator. This kit will contain the following:

  • (1) 7’ Red 6 gauge charge wire
  • (1) 8’ Black/Red ground wire
  • (2) Pre-installed connectors (a 3 pin connector and 1 pin connector)
  • (1) Bag kit containing (150 amp in-line fuse, 1 fuse holder, 2 screws, 6 large un-insulated ring terminals, 4 smaller insulated ring terminals, 4 splices, 4 pieces of heat shrink & 15 zip ties)

Year: Universal
Make: Universal
Model: Universal
Engine: Any
Trans.: Any

Painless Part Number: 30831 Category: Tags: , , , , Product ID: 20926

Description

This kit contains all of the components needed in order to connect a Ford 3G Alternator. This kit will contain the following:

  • (1) 7’ Red 6 gauge charge wire
  • (1) 8’ Black/Red ground wire
  • (2) Pre-installed connectors (a 3 pin connector and 1 pin connector)
  • (1) Bag kit containing (150 amp in-line fuse, 1 fuse holder, 2 screws, 6 large un-insulated ring terminals, 4 smaller insulated ring terminals, 4 splices, 4 pieces of heat shrink & 15 zip ties)

The popular Ford 3G Alternator conversion just got easier. The Painless 3G kit takes the parts chase away from this ever growing charging system upgrade. Until now, pigtails, large gauge charge wire, and a heavy duty inline fuse have all had to be sourced individually. This kit comes with both alternator connectors pre-installed, 8’ of large 6 gauge charge wire, a weather-proof fuse holder with a heavy duty 150 amp inline fuse, detailed instructions, and all weatherproof splices & ring terminals needed for a proper install.

Reviews

There are no reviews yet.

Be the first to review “Ford 3G Alternator Harness Part No 30831”

You may also like…

DuraSpark II Ignition Harness Part No 30812

$85.99

Year: Universal
Make: Universal
Model: Universal
Engine: Carbureted
Trans.: Any

Painless Part Number: 30812 Category: Tags: , , , Product ID: 20902

Description

Perfect replacement for your Ford Duraspark II ignition system or to upgrade your old points style ignition. It allows for the factory location of your module and coil. This part is recommended if you are also replacing the chassis harness.

Fits factory Ford Duraspark II Ignition systems with the blue module.

Reviews

There are no reviews yet.

Be the first to review “DuraSpark II Ignition Harness Part No 30812”

You may also like…

Make It Easy.
Make It Painless.

Address

2501 Ludelle St
Fort Worth, Texas 76105
817-244-6212

Tech Support

Central Time Zone (CST)

Monday-Thursday 8AM to 5PM

Friday 8AM to 4:30PM 

1-800-423-9696

Newsletter

Red Goat Marketing © 2024. All Rights Reserved.