Skip to content Skip to footer

1976-86 Jeep CJ – Trail Rocker Accessory Control System (w/o Switches) Part No 57024

$349.99

Painless Part Number: 57024 Category: Tags: , , , , , , , , , , , , , , , , , , , , Product ID: 21062

Description

Introducing the brand new Trail Rocker from Painless, allowing you to control up to eight accessories on your CJ Jeep! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it, are eight prewired switches mounted in our custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. Easily installed with our detailed instructions and plug-and-play design.

  • Control up to eight accessories, (8) 30 amp fuses, and (8) 30 amp relays
  • Weatherproof housing around the power center and connections
  • Custom bolt-on powder-coated bracket for the power center
  • Various switch panel options mount up to eight LED switches inside the Jeep
  • Fuses light up when blown

Winch Ready! The Trail Rocker system includes dedicated wires for controlling a winch. Purchase of our Winch Control Add-on Kit part number 57150 is required for operation.

Reviews

There are no reviews yet.

Be the first to review “1976-86 Jeep CJ – Trail Rocker Accessory Control System (w/o Switches) Part No 57024”

You may also like…

1976-86 Jeep CJ – Trail Rocker System w/Underdash 4 Switch Part No 57021

$474.99

Year: 1976-1986
Make: Jeep
Model: CJ

Painless Part Number: 57021 Category: Tags: , , , , , , , , , , , , , , , , , , , , Product ID: 21060

Description

Introducing the brand new Trail Rocker from Painless, allowing you to control up to eight accessories on your CJ Jeep! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it, are eight prewired switches mounted in our custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. Easily installed with our detailed instructions and plug-and-play design.

  • Control up to eight accessories, (8) 30 amp fuses, and (8) 30 amp relays
  • Weatherproof housing around the power center and connections
  • Custom bolt-on powder-coated bracket for the power center
  • Various switch panel options mount up to eight LED switches inside the Jeep
  • Fuses light up when blown

Winch Ready! The Trail Rocker system includes dedicated wires for controlling a winch. Purchase of our Winch Control Add-on Kit part number 57150 is required for operation.

Reviews

There are no reviews yet.

Be the first to review “1976-86 Jeep CJ – Trail Rocker System w/Underdash 4 Switch Part No 57021”

You may also like…

1976-86 Jeep CJ – Trail Rocker System w/Overhead 4 Switch Part No 57020

$481.99

Year: 1976-1986
Make: Jeep
Model: CJ

Painless Part Number: 57020 Category: Tags: , , , , , , , , , , , , , , , , , , , , Product ID: 21058

Description

Introducing the brand new Trail Rocker from Painless, allowing you to control up to eight accessories on your CJ Jeep! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it, are eight prewired switches mounted in our custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. Easily installed with our detailed instructions and plug-and-play design.

  • Control up to eight accessories, (8) 30 amp fuses, and (8) 30 amp relays
  • Weatherproof housing around the power center and connections
  • Custom bolt-on powder-coated bracket for the power center
  • Various switch panel options mount up to eight LED switches inside the Jeep
  • Fuses light up when blown

Winch Ready! The Trail Rocker system includes dedicated wires for controlling a winch. Purchase of our Winch Control Add-on Kit part number 57150 is required for operation.

Reviews

There are no reviews yet.

Be the first to review “1976-86 Jeep CJ – Trail Rocker System w/Overhead 4 Switch Part No 57020”

You may also like…

21 Circuit Direct Fit 1976-1986 Jeep CJ Harness Part No 10150

$871.99

  • Factory V6 & V8 Tachometers-  Inline connections are now provided at the ignition switch, just like a factory harness, that plug into the wire leads found on factory V6 & V8 tachometers.
  • Factory Clock- Two connectors that provide power and ground to the clock and clock backlighting that plug directly into a factory clock. These connectors can be removed to allow connection to a universal CJ clock as well.
  • Automatic Transmission Steering Column- Reverse switch and neutral safety switch connections for those using automatic transmission columns.
  • Under Hood Light- A factory style connection is now supplied in the engine harness. This connection will simply plug directly into the factory under hood light.
  • Manual Transmission Pigtail- The old 10110 has always had a connection for manual transmissions, however, the 10150 now also comes with a transmission pigtail. This pigtail allows for the total replacement of the neutral safety switch, reverse switch, and four wheel drive indicator switch wires, where as the previous 10110 simply plugged into the existing factory transmission pigtail. Some assembly will be required to this pigtail based on the transmission your CJ currently has, instructions and details are provided.
  • Factory Tail Light Connectors-  Factory style molded connectors for the tail lights are now pre-installed onto the tail harness, allowing for a true plug and play connection to those using factory tail lights. For those using aftermarket lights which do not have the factory molded connector, a pair of Weather –Pac connectors is also provided to produce a clean, weatherproof connection.
  • Molded Trailer Connector- Now included pre-spliced in the Tail Section of the harness is a connector for connecting to trailer lighting. This connector will supply tail light power, left and right turn/brake power, as well as a clean ground source. A mate to the pre-installed connector is even provided.
  • Factory Style parts Kit- This kit will provide factory style connectors and terminals for many visible connections. This makes for a cleaner appearing install. Also included are harness attachment clips that fit the ¼” holes left behind by the factory harness attachment clips.
  • Bulbs- The 10150 now includes all the bulbs needed for front turn/park and marker lights, rear turn/brake/tail and marker lights, as well as gauge cluster bulbs. Dielectric grease is also provided to prevent corrosion to the bulbs and headlight connections.
Painless Part Number: 10150 Category: Tags: , , , , , , , , , , , , , Product ID: 20709

Description

Not just a quick wash and a coat of wax on the old 10110, the new 10150 Direct Fit 1976-1986 Jeep CJ harness has undergone a complete “frame off” restoration. The new and improved harness addresses many issues that occasionally came up when trying to install the previous version.

Now included is a fully integrated ground circuit that connects directly to the negative side of the battery and provides a clean ground source to every component, as well as offering individual wires to help ground the dash and core support. This is a key addition for those using fiberglass bodies.

The charging system wiring has also been improved, now using 6 gauge charge wire and an inline 100 amp fuse, allowing hassle free usage of high amperage alternators. No more sourcing larger charge wire, piggybacking additional wire, or sourcing a larger inline fuse or fuse holder. The new 10150 comes out of the box capable of supporting a 100 amp alternator.

Connections for more factory CJ options have also been added. These additions include:

  • Factory V6 & V8 Tachometers-  Inline connections are now provided at the ignition switch, just like a factory harness, that plug into the wire leads found on factory V6 & V8 tachometers.
  • Factory Clock- Two connectors that provide power and ground to the clock and clock backlighting that plug directly into a factory clock. These connectors can be removed to allow connection to a universal CJ clock as well.
  • Automatic Transmission Steering Column- Reverse switch and neutral safety switch connections for those using automatic transmission columns.
  • Under Hood Light- A factory style connection is now supplied in the engine harness. This connection will simply plug directly into the factory under hood light.
  • Manual Transmission Pigtail- The old 10110 has always had a connection for manual transmissions, however, the 10150 now also comes with a transmission pigtail. This pigtail allows for the total replacement of the neutral safety switch, reverse switch, and four wheel drive indicator switch wires, where as the previous 10110 simply plugged into the existing factory transmission pigtail. Some assembly will be required to this pigtail based on the transmission your CJ currently has, instructions and details are provided.
  • Factory Tail Light Connectors-  Factory style molded connectors for the tail lights are now pre-installed onto the tail harness, allowing for a true plug and play connection to those using factory tail lights. For those using aftermarket lights which do not have the factory molded connector, a pair of Weather –Pac connectors is also provided to produce a clean, weatherproof connection.
  • Molded Trailer Connector- Now included pre-spliced in the Tail Section of the harness is a connector for connecting to trailer lighting. This connector will supply tail light power, left and right turn/brake power, as well as a clean ground source. A mate to the pre-installed connector is even provided.
  • Factory Style parts Kit- This kit will provide factory style connectors and terminals for many visible connections. This makes for a cleaner appearing install. Also included are harness attachment clips that fit the ¼” holes left behind by the factory harness attachment clips.
  • Bulbs- The 10150 now includes all the bulbs needed for front turn/park and marker lights, rear turn/brake/tail and marker lights, as well as gauge cluster bulbs. Dielectric grease is also provided to prevent corrosion to the bulbs and headlight connections.

The biggest improvement to this harness is the all new full color instruction manual. This manual provides 140+ pages of color schematics, photos, and step by step instructions to wiring your CJ from headlight to tail light and covers most popular aftermarket add-ons as well.

 

Reviews

There are no reviews yet.

Be the first to review “21 Circuit Direct Fit 1976-1986 Jeep CJ Harness Part No 10150”

You may also like…

22 Circuit Classic Customizable 1975 & Later Jeep CJ Harness Part No 10106

$499.99

This harness includes circuits for:

A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Under Hood Light
Wipers

* Including Wires For:
Emergency Brake Light
Four Wheel Drive Light
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Year: 1976-1986
Make: Jeep
Model: CJ
Engine: Carbureted or Any Stand Alone Fuel Injection
Trans.: Any

Number of Circuits: 12 Fuses w/ Horn Relay and Maxi Fuse
Harness Length: Universal
Fuse Type: Blade & Maxi Fuse
Firewall Passthrough: Bulkhead Connector
Color Code Based:  Factory Jeep
Circuit Designations: Printed on Wires

Connections Included:

Column Mounted Ignition Switch, Turn Switch, Dimmer Switch, Two Headlight Pigtails, 10SI & 12 SI Alternator, HEI Power and Tach and 20 Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor.

Painless Part Number: 10106 Category: Tags: , , , , , Product ID: 20684

Description

*If you are looking for a more ‘plug and play’ wiring harness please see Painless Kit No. 10150*

This 22 circuit Painless Performance harness works perfect for custom 1975 & later CJ Jeeps. This harness uses an OEM style fuse block and provides open ended wire leads, allowing for custom routing of wires for your CJ. This harness is designed to be a customizable kit, and routes the wire through the firewall via a bulkhead connector.  Like from the factory on your Jeep, the ignition switch is in the column. This kit includes GM column mounted ignition switch connectors and a GM column mounted turn signal switch connector pre-terminated and ready to install. Also included are pre-wire plugs for headlights and the dimmer switch. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation.

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Classic Customizable 1975 & Later Jeep CJ Harness Part No 10106”

You may also like…

22 Circuit Classic Customizable 1974 & Earlier Jeep CJ Harness Part No 10105

$489.99

This harness includes circuits for:

  1. A/C & Heat
  2. Accessory / Cigarette Lighter
  3. Backup Lights
  4. Brake Lights
  5. Charging
  6. Dome Light
  7. Electric Choke
  8. Emergency flashers
  9. Fan Relay Activation Power
  10. Fused Power Source
  11. Headlights
  12. Horn (Relay)
  13. Ignition Coil
  14. Instrument Panel Lighting and Gauges*
  15. Park Lights
  16. Radio/Clock (Constant and Switched)
  17. Starting
  18. Tail Lights
  19. Third Brake Light
  20. Turn Signals
  21. Under Hood Light
  22. Wipers

* Including Wires For:
Brake Warning Light
Emergency Brake Light
Four Wheel Drive Light
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter

Year: 1944-1974
Make: Jeep
Model: CJ
Engine: Carbureted or Any Stand Alone Fuel Injection
Trans.: Any

Number of Circuits: 22 Circuits – 12 Fuses w/ Horn Relay and Maxi Fuse
Harness Length: Factory Fitment
Fuse Type: Blade & Maxi Fuse
Firewall Passthrough: Bulkhead Connector
Color Code Based:  Factory Jeep
Circuit Designations: Printed on Wires

Connections Included:

Two Headlight Pigtails, 10SI & 12 SI Alternator, Dimmer Switch and 20 Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor.

Painless Part Number: 10105 Category: Tags: , , , , , Product ID: 20682

Description

This 22 circuit Painless Performance factory upgrade harness for 1974 & earlier CJ Jeeps uses the OEM style fuse block. Open ended wire leads allow for custom routing of the wiring for your CJ. This harness routes the wires through a firewall via a grommet in the bulkhead and the ignition switch is in the dash for your earlier Jeep CJ.  Also included are pre-wire plugs for headlights. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation.

Reviews

There are no reviews yet.

Be the first to review “22 Circuit Classic Customizable 1974 & Earlier Jeep CJ Harness Part No 10105”

You may also like…

Jeep Duraspark II Harness Part No 30819

$98.99

Year: UNIVERSAL
Make: JEEP
Model: CJ
Engine: 6/8 Cylinder Jeep CJ Engines
Trans.: Any

Painless Part Number: 30819 Category: Tags: , , , , , , , Product ID: 20916

Description

Perfect replacement for your Jeep Duraspark II ignition system. It allows for the factory location of your module and coil. This part is recommended if you are also replacing the chassis harness.

Fits 6 and 8 cylinder Jeeps

Reviews

There are no reviews yet.

Be the first to review “Jeep Duraspark II Harness Part No 30819”

You may also like…

Make It Easy.
Make It Painless.

Address

2501 Ludelle St
Fort Worth, Texas 76105
817-244-6212

Tech Support

Central Time Zone (CST)

Monday-Thursday 8AM to 5PM

Friday 8AM to 4:30PM 

1-800-423-9696

Newsletter

Red Goat Marketing © 2024. All Rights Reserved.